stc8

A lite firmware library for STC8G/STC8H series MCU

Simple ISP Flash Tools for various Microcontrollers

Templates for bare-metal firmware development for some entry-level microcontrollers

Open Source STC8G/STC8H ISP flash tool

SDCC support + HAL + drivers for STC 8051 MCU

#NVJOB STC8 v 3.2 (Custom shader for Unity SpeedTree 8)

stcgal patched to support STC8G, STC8H, STC8A8K64D4 and STC32G.

Demo/SDK version of RFE

STC8H8K64U UART RX portable core and C51 ISR source with host tests; target build pending.

stcmx is a command-line tool that allows a very easy generation of the corresponding initialization C code for STC8 MCUs through a step-by-step process.

How-To style documentation on STC MCU

One-button WS2812/NeoPixel controller on a $0.27 STC8G1K08A (8-pin 8051): 7 colors, brightness ramp, EEPROM memory. Bit-banged 800kHz at 35MHz IRC. Keil + SDCC.

An unofficial Arduino Core that brings Arduino IDE support to STC Micro's STC8G family of 8051-based microcontrollers.

Control WS2812 or NeoPixel LED strips with one button using this cost-effective, bit-banged firmware for the STC8G1K08A microcontroller.

STC MCU library to interface the nRF24l01 Radio Transceiver.

STC8A8KS4A64单片机通过机智云通讯协议连接ESP8266-01模块，连接机智云上传DS18B20温度传感器温度值以及高低温报警，控制两路LED。

Investigating tuning parameters of the STC8G1K17A's internal RC oscillator

STC8A8KS4A64单片机通过EMW3080模组的MQTT-AT指令，连接阿里云平台。

基于 STC8H8K64U 的 51 四足机器人：硬件、驱动、动作控制与联调

STC8H1K08 peripheral demos for SDCC.